Revision as of 22:07, 20 June 2011

The following is *rough* instructions on how to configure FreeSCO to talk to a ReplayTV using a dialup modem (without a phone line) This is a wiki... I'd like someone to make better instructions (with pictures), and maybe even a Video!

Make sure your modem is compatable with your Replay

1. connect a phone line from your replay to the "LINE" port of your PC modem
2. Open a connection to the modem with HyperTERM or PUTTY if your version of windows doesn't have HyperTERM.
3. Type "AT" followed by <ENTER>. The modem should respond "OK". If not you're not talking to your modem.
4. Type "ATA" <ENTER> on the modem. You should hear a high pitched tone. If you don't, check your speaker setup. Remember what this tone sounds like. When ready press a key and you should get "NO CARRIER"
5. Have the Replay initiate a network connection. (243 Zones, option 4)
6. When the Replay says "Dialing" type "ATA" <ENTER> on the PC Terminal
7. You should hear the high pitched "Answer Tone" followed by the Replay trying to sync up.
8. You should get a "CONNECT" message. That means you're PC is compatible.
9. If you don't get a connect, fix it before spending time moving forward.

FreeSCO VM setup

1. Download and install VMware Player http://www.vmware.com/products/player/
2. Download and unzip the FreeSCO Virt Machine: http://xmltv.org/alpha/FreeSCO_vmware.zip
3. Open the FreeSCO config file in VMWare Player
4. Edit Virtual Machine Settings if you need to adjust the serial port (default com1)
5. Play the virtual machine
6. Note the IP when it starts (if the subnet isn't 192.168.26.x you'll need to change stuff)
7. The VMWare player will capture your mouse and keyboard when you click in it. <CTR><ALT> will release it.
8. Click in the FreeSCO process and log in as root/root
9. Type "setup" to enter setup mode.
10. <enter> to accept the default color mode.
11. Select Advanced config, option 71
12. choose 710 if needed to configure your modem.
13. choose 714 if your subnet is not 192.168.26.x (change to a free IP address in subnet)
14. Type x to return to the advanced menu
15. Select Advanced config option 41 - DNS Server
16. Set option 414 - Primary DNS address to your WiRNS PC IP.
17. Exit advance configuration
18. save changed settings
19. Type "reboot" to reboot the FreeSCO machine
20. You should hear your modem try and answer every minute or so.

WiRNS Setup

1. Download and install WiRNS
2. someone should copy or link to relevant WiRNS setup instructions, noting that dialup machines can only use a subset of it's functions.