ReplayTV

From XMLTV
Revision as of 18:22, 18 June 2011 by Rmeden (Talk | contribs) (Initial ReplayTV page)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

ReplayTV Shutdown FAQ

Digital Networks North America has decided to stop sending guide updates to ReplayTV devices, including "lifetime" subscribed units on 7/31. The items below are the current consensus answers from the forums. No one has all the answers at this time.


What will happen on 7/31

DNNA says the units will be able to "Manually Record" tv shows after the 7/31 shutdown. ReplayTV support has told some community members that all servers will be shut down on 7/31, preventing setting the system clock. In this case, "Manual Record" probably just means pressing the "record" button to record for a period of time, not a manually scheduled recording.

Using WiRNS to provide guide data

WiRNS is a free (as in beer) application that can feed guide data to ReplayTV devices and offers other features. WiRNS can obtain data from any XMLTV source or Schedules Direct.

It is not yet known if a WiRNS connected unit can function without Replay's servers. Testing is underway.

The complexity of a WiRNS solution varies with your ReplayTV unit and configuration. See other sections of this FAQ for details.

What about a Scheduled Manual Record

DNNA has only said a "Manual Recoding" will be possible. Scheduling a recording requires setting the clock, which may or may not be possible.

How will I set the clock?

2k/3k/Showstoppers

There is a hack *need to add link* to add a time set page to your Replay. Doing so involves removing the hard disk and adding programs using a PC.

Once connected to a network (see dialup section), 2k/3k units can also use NTP to set the time. WiRNS can provide the NTP proxy functionality

4k/5k Units

The NTP time is cryptographically signed. That means without the "key" we may not be able to to do! Finding the key via brute force may open community members to prosecution under the DMCA. Hopefully DNNA or DirectTV will release the key.

What about dialup users

A solution exists were a PC (phsyical or virtual) is configured as a FreeSCO router. The ReplayTV can then dial into the FreeSCO router using a phone line, phone line simulator, or even a direct connection. Once connected to the FreeSCO router, WiRNS can be used to update the ReplayTV box.

Such a solution is currently complicated, but eventually step by step directions will be provided

What about activation

2k/3k/Showstopper units do not require activation. 4k/5k units are being fully activated once the connect to the ReplayTV servers. Any 4k/5k unit with "lifetime" activation, still needs to "phone home" before 7/31 to remove the activation check. Any 4k/5k unit that doesn't "phone home" before 7/31 may never be able to be activated.

Where can i get more information

Discussion and work on solutions are quite active in the following Forums:

WiRNS Planet Replay Forum
ReplayTV AVS Forum

How can I help

  • If you see anything wrong with this FAQ, please update it. (it is a Wiki after all)
  • If you have the technical ability, monitor the forums and help!
  • Create step by step solution instructions, (start in the forum, can move to a wiki later)
  • Create step by step instruction videos